|
|
|
  ![]() |
Parker Super O-lube Silicone based O-ring Grease / Lubricant Parker Super-O-Lube is a silicone fluid recommended for use with all rubber materials; Epdm, polyacrylate, Vamac, neoprene, fluorosilicone, nitrile NBR , HNBR, polyurethane, fluorocarbon, Aflas, Kalrez, FKM, FPM, FFKM, Hifluor, and Parofluor / Perfluor o-ring materials. Only a thin film of Super-O-Lube should be used with silicone rubber to prevent seal damage
Parker Super O-Lube is a silicone based lubricant intended to compliment Parker O-Lube in that it can be used with virtually any rubber polymer. Super O-Lube can also be used over a wider temperature range and in most cases will provide improved environmental protection to the elastomer. It is recommended that Super O-Lube be used sparingly as only a thin film is necessary for optimum results. This lubricant is useful with a wide variety of fluid media since it is quite inert. High pressure systems as well as vacuum uses are typical applications where Super O-Lube is beneficial. Temperature range is - 20 gr C / -65°F to + 205 gr C +400°F. Parker Super O-Lube is nontoxic and non-irritating under normal conditions. It will not clog 30 micron filters and is unusually moisture resistant and adheres with unusual tenacity. -Do you want more information about the Parker Super O-lube ?
|
Here you find ...
PISTON SEALS, NBR, ROD SEAL, GUARNIZIONI, EPDM WIPERS, O-RINGS, VITON, WRC, ROTARY SEALS, DIN, PTFE SEALS,HYDRAULIC SEALS, MVQ, SCRAPERS, OIL SEALS, HEAVY DUTY SEALS, NSF, O-KROUZKY, POLYURETHANE SEALS, ISO, HNBR, MIL SPEC O-RING, PNEUMATIC SEAL, O-RINGE, FPM, GUIDE RINGS, U-CUPS, V-PACKS, JOINTS TORIQUES, SEAL JET, GUIDING TAPE, DICHTUNG, KTW, O-RINGI, RUBBER SEAL, FLUOR SOLICONE, BONDED SEALS, JIS O-RINGS, METAL SEAL, BEARINGS, O-RINGEN, JUNTAS TORICAS, FKM, METAL O-RINGS, LIP SEAL, BACK-UP RINGS, WEAR RINGS, KITS, NITRILE, BUFFER SEALS, O-GYURU, SPRING ENERGIZED SEAL, X-RINGS, O-RINGLER, METRIC SEALS, SHAFT SEALS, SEMI CONDUCTOR, GASKETS,
|
|
|
Copyright Internet Affairs 2008 |
|