Claron Polyseal Single Acting Piston Seal CPU

Get a quote

Design:

The Claron style CPU is a symmetrical profiled lip seal manufactured in a high performance grade of Polyurethane and is suitable for both piston and rod sealing. The sealing lips are machine trimmed to ensure dimensional consistency and good low pressure sealing. Polyurethane exhibits outstanding abrasion and extrusion resistance.

These range perameters are Maximum simultaneous conditions.

Optimum service conditions are affected by temperature, speed,pressure, surface finish and extrusion gaps.

Refer to Appendix 1 for further information.

AU Polyurethane
DIN Hydraulic Fluid Description °C
H Mineral oil without additives 100
H-L Mineral Fluid with anti corrosion and anti ageing additives 100
H-LP Mineral oil as HL plus additives reducing wear, raising load 100
H-LPD Mineral oil as H-LP but with detergents and dispersants 100
H-V Mineral oil as H-LP plus improved viscosity temp. 100
HFA E Emulsions of mineral oil in water. Water content 80-95% 40
HFA S Synthetic oil in water. Water content 80-95% 40
HFB Emulsions of water in mineral oil. Water content 40% 40
HFC Aqueous polymer solutions. Water content 35% ns
HFD R Phosphoric acid ester based ns
HFD S Chlorinated hydrocarbon based ns
HFD T Mixtures of HFD R and HFD S ns
HEPG Polyglycol based ns
HETG Vegetable Oil based 60
HEES Fully synthetic ester based 60

Maximum Diametral Clearance F

Note: Clearance gap F is the maximum permissable. i.e. gap completely on one side, in the temperature range of -30°C to 80°C The use of a suitably selected Claron bearing ring will effectively reduce the clearance gap F max. to a value closer to F/2 thus increasing the pressure capability of the seal.

Housing

For surface finish and recommended lead in chamfers refer to the illustration below. For housing dimensions and machining tolerances refer to the catalogue page of selected seal. Refer to Appendix 4 for value of tolerance symbols.

Refer to section C for rod application.

Fitting:

For the seal to function correctly, it is important that care be taken in fitting the seal within its housing. For a detailed checklist, refer to Appendix 3.

 

ØD1 Ød1 L1 L2 S C R1
CPU 062039 16.00 10.00 5.00 4.40 4.00 3.00 0.20
CPU 078047 20.00 12.00 9.00 8.40 4.00 3.00 0.20
CPU 078055 20.00 14.00 4.50 4.00 3.00 3.00 0.20
CPU 086063 22.00 16.00 5.00 4.40 3.00 3.00 0.20
CPU 098055 25.00 14.00 6.10 5.50 5.50 4.00 0.30
 

CPU 098063

 

25.00

 

16.00

 

8.25

 

7.50

 

4.50

4.00  

0.30

CPU 098070 25.00 18.00 6.75 6.00 3.50 3.00 0.20
CPU 102063 26.00 16.00 8.75 8.00 5.00 4.00 0.30
CPU 102070 26.00 18.00 5.70 5.00 4.00 3.00 0.20
CPU 110078 28.00 20.00 7.25 6.50 4.00 3.00 0.20
CPU 110078/1 28.00 20.00 5.70 5.00 4.00 3.00 0.30
CPU 110078/2 28.00 20.00 4.50 4.00 4.00 3.00 0.20
CPU 118078 30.00 20.00 8.75 8.00 5.00 4.00 0.30
CPU 118086 30.00 22.00 6.75 6.00 4.00 3.00 0.20
CPU 118088 30.00 22.40 5.70 5.00 3.80 3.00 0.30
CPU 129098 33.00 25.00 6.30 5.70 4.00 3.00 0.20
CPU 129098/1 33.00 25.00 8.75 8.00 4.00 3.00 0.20
CPU 129098/2 33.00 25.00 5.60 5.00 4.00 3.00 0.20
CPU 137098 35.00 25.00 8.75 8.00 5.00 4.00 0.30
CPU 137098/1 35.00 25.00 10.75 10.00 5.00 4.00 0.30
CPU 137098/2 35.00 25.00 7.50 7.30 5.00 4.00 0.30
CPU 139110 35.50 28.00 5.70 5.00 3.75 3.00 0.20
CPU 149098 38.00 25.00 10.75 10.00 6.50 4.00 0.30
CPU 157078 40.00 20.00 12.00 11.00 10.00 5.00 0.40
CPU 157098 40.00 25.00 10.75 10.00 7.50 5.00 0.40
CPU 157118 40.00 30.00 10.75 10.00 5.00 4.00 0.30
CPU 157118/1 40.00 30.00 7.00 6.00 5.00 4.00 0.30
CPU 163124 41.50 31.50 7.00 6.00 5.00 4.00 0.30
CPU 165118 42.00 30.00 10.75 10.00 6.00 4.00 0.30
CPU 165125 42.00 32.00 6.30 5.80 5.00 4.00 0.30
CPU 169110 43.00 28.00 11.00 10.00 7.50 5.00 0.40
CPU 173141 44.00 36.00 8.75 8.00 4.00 3.00 0.20
CPU 177118 45.00 30.00 10.75 10.00 7.50 5.00 0.30
CPU 177137 45.00 35.00 10.75 10.00 5.00 4.00 0.30
CPU 177137/1 45.00 35.00 7.00 6.00 5.00 4.00 0.30
CPU 181141 46.00 36.00 8.00 7.30 5.00 4.00 0.30
CPU 196118 50.00 30.00 10.75 10.00 10.00 4.00 0.30
CPU 196137 50.00 35.00 10.75 10.00 7.50 5.00 0.40
CPU 196157 50.00 40.00 10.75 10.00 5.00 4.00 0.30
CPU 196157/2 50.00 40.00 5.75 5.00 5.00 4.00 0.30
CPU 196157/3 50.00 40.00 7.00 6.00 5.00 4.00 0.30
CPU 196165 50.00 42.00 6.30 5.80 4.00 3.00 0.20
CPU 216149 55.00 38.00 10.75 10.00 8.50 5.00 0.40
CPU216157 55.00 40.00 10.75 10.00 7.50 5.00 0.40
CPU 216177/1 55.00 45.00 6.75 6.00 5.00 4.00 0.30
CPU 216177 55.00 45.00 10.75 10.00 5.00 4.00 0.30
CPU 236157 60.00 40.00 12.75 12.00 10.00 5.00 0.40
CPU 236157/1 60.00 40.00 19.00 18.00 10.00 5.00 0.40
CPU 236177 60.00 45.00 10.75 10.00 7.50 5.00 0.40
CPU236196 60.00 50.00 10.75 10.00 5.00 4.00 0.30
CPU 236196/1 60.00 50.00 7.00 6.00 5.00 4.00 0.30
CPU 248208 63.00 53.00 6.75 6.00 5.00 4.00 0.30
CPU 255177 65.00 45.00 10.75 10.00 10.00 5.00 0.40
CPU 255196 65.00 50.00 10.75 10.00 7.50 5.00 0.40
CPU 255216/2 65.00 55.00 7.00 6.00 5.00 4.00 0.30
CPU 255216 65.00 55.00 12.75 12..00 5.00 4.00 0.30
CPU 275196 70.00 50.00 12.75 12.00 10.00 5.00 0.40
CPU 275196/1 70.00 50.00 10.75 10.00 10.00 5.00 0.40
CPU 275196/2 70.00 50.00 19.00 18.00 10.00 5.00 0.40
CPU 275236/1 70.00 60.00 7.00 6.00 5.00 4.00 0.30
CPU 275236 70.00 60.00 12.75 12.00 5.00 4.00 0.30
CPU 295216 75.00 55.00 13.00 12.00 10.00 5.00 0.60
CPU 295255 75.00 65.00 12.75 12.00 5.00 4.00 0.30
CPU 295255/1 75.00 65.00 10.75 10.00 5.00 4.00 0.30
CPU 295255/2 75.00 65.00 7.00 6.00 5.00 4.00 0.30
CPU 307228 78.00 58.00 16.00 15.00 5.00 4.00 0.30
CPU 314236 80.00 60.00 12.75 12.00 10.00 5.00 0.40
CPU 314236/1 80.00 60.00 19.00 18.00 10.00 5.00 0.40
CPU 314255 80.00 65.00 12.75 12.00 7.50 5.00 0.40
CPU 314275/3 80.00 70.00 7.00 6.00 5.00 4.00 0.30
CPU 314275/1 80.00 70.00 9.00 8.00 5.00 4.00 0.30
CPU 314275/2 80.00 70.00 11.00 10.00 5.00 4.00 0.30
CPU 314275 80.00 70.00 12.75 12.00 5.00 4.00 0.30
CPU 334255 85.00 65.00 13.00 12.00 10.00 5.00 0.60
CPU 334275 85.00 70.00 12.75 12.00 7.50 5.00 0.40
CPU 334295 85.00 75.00 7.00 6.00 5.00 4.00 0.30
CPU 354275 90.00 70.00 12.75 12.00 10.00 5.00 0.40
CPU 354295 90.00 75.00 12.75 12.00 7.50 5.00 0.40
CPU 354314/1 90.00 80.00 7.00 6.00 5.00 4.00 0.30
CPU 354314 90.00 80.00 12.75 12.00 5.00 4.00 0.30
CPU 374295 95.00 75.00 13.00 12.00 10.00 5.00 0.60
CPU 374314 95.00 80.00 10.75 10.00 7.50 5.00 0.40
CPU 393314 100.00 80.00 12.75 12.00 10.00 5.00 0.40
CPU 393334/1 100.00 85.00 10.00 9.00 7.50 5.00 0.40
CPU 393334 100.00 85.00 12.75 12.00 7.50 5.00 0.40
CPU 413334 105.00 85.00 13.00 12.00 10.00 5.00 0.60
CPU 4133354/1 105.00 90.00 10.00 9.00 7.50 5.00 0.40
CPU 413354 105.00 90.00 12.75 12.00 7.50 5.00 0.40
CPU 433354 110.00 90.00 13.00 12.00 10.00 5.00 0.60
CPU 433374/1 110.00 95.00 10.00 9.00 7.50 5.00 0.40
CPU 433374 110.00 95.00 12.75 12.00 7.50 5.00 0.40
CPU 452374 115.00 95.00 13.00 12.00 10.00 5.00 0.60
CPU 452393/1 115.00 100.00 10.00 9.00 7.50 5.00 0.40
CPU 452393 115.00 100.00 12.75 12.00 7.50 5.00 0.40
CPU 472393 120.00 100.00 13.00 12.00 10.00 5.20 0.60
CPU 492393 125.00 100.00 15.75 15.00 12.50 6.50 0.60
CPU492413 125.00 105.00 17.00 15.00 10.00 5.00 0.60
CPU 492413/1 125.00 105.00 13.00 12.00 10.00 5.00 0.60
CPU 492433 125.00 110.00 12.75 12.00 7.50 5.00 0.40
CPU 492440 125.00 112.00 10.00 9.00 6.50 5.00 0.30
CPU 492452 125.00 115.00 12.75 12.00 5.00 4.00 0.30
CPU 511433 130.00 110.00 17.00 15.00 10.00 5.00 0.60
CPU 551472 140.00 120.00 17.00 15.00 10.00 5.00 0.60
CPU 551492 140.00 125.00 10.00 9.00 7.50 5.00 0.40
CPU 570492 145.00 125.00 17.00 15.00 10.00 5.00 0.60
CPU 590511 150.00 130.00 17.00 15.00 10.00 5.00 0.60
CPU 590535 150.00 136.00 10.00 9.00 7.50 5.00 0.40
CPU 610551 155.00 140.00 10.00 9.00 7.50 5.00 0.40
CPU 629551 160.00 140.00 17.00 15.00 10.00 5.00 0.60
CPU 629570 160.00 145.00 10.00 9.00 7.50 5.00 0.40
CPU 669590 170.00 150.00 17.00 15.00 10.00 5.00 0.60

 

Merk

Claron Polyseals

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “Claron Polyseal Single Acting Piston Seal CPU” te beoordelen

Het e-mailadres wordt niet gepubliceerd. Vereiste velden zijn gemarkeerd met *

WE’D LOVE TO HELP

Get a qoute