TURCON GLYD RING T
Description
Turcon Glyd Ring T is a further technical development of the Turcon Glyd Ring seal which has been successfully used for decades. It is fully interchangeable with the earlier Glyd Ring seals in all new applications. Glyd Ring T meets all the market demands for a function-specific seal solution, observing economic and ecological aspects.
The benefits of the patented seal concept are provided by the innovative functional principle of the trapezoidal profile cross-section.
* Patent-No.:
DE 41 40833 C3
EP 0 582 593
Japan 2 799 367
USA 5,433,452
Advantages
The benefits offered to date by the Glyd Ring are still
retained in full, and are now complemented by a number
of further important advantages:
– Very good static leak-tightness
– Increased clearance possible (approx. +50%), depending on the operating conditions
– Low friction, no stick-slip effect
– Simple groove design
– Installation grooves to ISO 7425/2
– Available for all rod diameters up to 2.600 mm.
Both lateral profile flanks are inclined so that the seal profile tapers towards the seal surface. The profile can thus retain the robust and compact form typical of piston seals without losing any of the flexibility required to achieve a pressure-related maximum compression
The edge angle created by the special Glyd Ring T cross-sectional form permits an additional degree of freedom and enables a slight tilting movement of the seal. Maximum compression is thus always shifted towards the area of the seal edge directly exposed to the pressure. On the low-pressure edge of the seal, on the other hand, the Glyd Ring T exhibits only zones with neutral strains without compressive or shearing loads, thus effectively reducing the danger of gap extrusion. The resulting benefits for the user can be seen in the following list.
Application Examples
The Turcon Glyd Ring T is the recommended sealing element for double acting inside sealing seal for hydraulic components such as:
- Injection moulding machines
- Machine tools
- Presses
- Handling machinery
- Agriculture
- Valves.
It is particularly recommended for heavy duty and large diameter applications.
Technical Data
Operating pressure: Up to 80 MPa
Speed: Up to 15 m/s
Temperature: -45°C to +200°C (depending on O-Ring material)
Media: Mineral oil-based hydraulic fluids, flame retardant hydraulic fluids, environmentally safe hydraulic fluids (bio-oils), water, air and others, depending on the O-Ring material (see Table XLI)
Clearance: The maximum permissible radial clearance smax is shown in Table XLII as a function of the operating pressure and functional diameter.
Important Note:
The above data are maximum values and cannot be used at the same time. e.g. the maximum operating speed depends on material type, pressure, temperature and gap value.
Materials
For hydraulic components with reciprocating movement in mineral oils containing zinc or medium with good lubricating performance.
Turcon Seal: Turcon T46
Energiser: O-Ring NBR 70 shore A or FKM 70 Shore A depending on the temperature
Set reference: T46N or T46V
Non-lubricating fluids or pneumatic applications require self-lubricating sealing materials. Therefore we recommend:
Turcon Seal: Turcon T40
Energiser: O-Ring NBR 70 Shore A or FKM 70
Shore A depending on the temperature
Set reference: T40N or T40V
If rougher surface finish must be sealed, we recommend:
Zurcon Seal: Zurcon Z51
Energiser: O-Ring NBR 70 Shore A
Set reference: Z51N
| Material, Applications, Properties | Code | O-Ring Material | Code | O-Ring Operating Temp.* °C |
Mating Surface Material | MPa max. |
| Turcon T46 Standard material for hydraulics, high compressive strength, good sliding and wear properties, good extrusion resistance, BAM tested. Bronze filled Colour: Greyish to dark brown |
T46 | NBR – 70 Shore A | N | -30 to +100 | Steel, hardened Steel, chromeplated Cast iron | 60 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 | ||||
| FKM – 70 Shore A | V | -10 to +200 | ||||
| Turcon T40 For all lubricating and non-lubricating hydraulic fluids, hydraulic oils without zinc, water hydraulic, soft mating surfaces, good extrusion resistance. High carbon fibre filled Colour: Grey |
T40 | NBR – 70 Shore A | N | -30 to +100 | Steel Steel, chromeplated Cast iron Stainless steel Aluminium Bronze |
25 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 | ||||
| FKM – 70 Shore A | V | -10 to +200 | ||||
| EPDM – 70 Shore A | E** | -45 to +145 | ||||
| Zurcon Z51*** For lubricating hydraulic fluids, high abrasion resistance, high extrusion resistance, limited chemical resistance. Cast polyurethane Colour: Yellow to light-brown |
Z51 | NBR – 70 Shore A | N | -30 to +100 | Steel Steel, chromeplated Cast iron Ceramic coating Stainless steel |
80 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 |
Ordering Example
Turcon Glyd Ring T, complete with O-Ring, standard
series, Series RT03 (from Table).
Rod diameter: dN = 80.0 mm
Part No.: RT0300800 (from Table)
Select the material from Table. The corresponding code numbers are appended to the Part No. (from Table). Together these form the order number. The order number for all intermediate sizes not shown in Table can be determined following the example opposite.
|
Groove Diame- ter | Groove Width | Part No. | O-Ring Sizes | |
| dN f8/h9 | D1 H9 | L1 +0.2 | |||
| 100,0 | 110,7 | 4,2 | RG4501000 | 104.37 x 3.53 | |
| 100,0 | 115,1 | 6,3 | RG4301000 | 107.32 x 5.33 | |
| 101,6 | 112,3 | 4,2 | RG4501016 | 107.54 x 3.53 | |
| 101,6 | 116,7 | 6,3 | RG4301016 | 107.32 x 5.33 | |
| 104,7 | 119,8 | 6,3 | RG4301047 | 110.49 x 5.33 | |
| 105,0 | 115,7 | 4,2 | RG4501050 | 110.72 x 3.53 | |
| 105,0 | 120,1 | 6,3 | RG4301050 | 110.49 x 5.33 | |
| 110,0 | 120,7 | 4,2 | RG4501100 | 113.89 x 3.53 | |
| 110,0 | 125,1 | 6,3 | RG4301100 | 116.84 x 5.33 | |
| 110,0 | 130,5 | 8,1 | RG4101100 | 120.02 x 7.00 | |
| 112,0 | 127,1 | 6,3 | RG4301120 | 116.84 x 5.33 | |
| 115,0 | 125,7 | 4,2 | RG4501150 | 120.24 x 3.53 | |
| 115,0 | 130,1 | 6,3 | RG4301150 | 120.02 x 5.33 | |
| 118,0 | 133,1 | 6,3 | RG4301180 | 123.19 x 5.33 | |
| 120,0 | 130,7 | 4,2 | RG4501200 | 123.42 x 3.53 | |
| 120,0 | 135,1 | 6,3 | RG4301200 | 126.37 x 5.33 | |
| 125,0 | 135,7 | 4,2 | RG4501250 | 129.77 x 3.53 | |
| 125,0 | 140,1 | 6,3 | RG4301250 | 129.54 x 5.33 | |
| 129,0 | 139,7 | 4,2 | RG4501290 | 132.94 x 3.53 | |
| 130,0 | 140,7 | 4,2 | RG4501300 | 136.12 x 3.53 | |
| 130,0 | 145,1 | 6,3 | RG4301300 | 135.89 x 5.33 | |
| 135,0 | 145,7 | 4,2 | RG4501350 | 139.29 x 3.53 | |
| 135,0 | 150,1 | 6,3 | RG4301350 | 142.24 x 5.33 | |
| 140,0 | 150,7 | 4,2 | RG4501400 | 145.64 x 3.53 | |
| 140,0 | 155,1 | 6,3 | RG4301400 | 145.42 x 5.33 | |
| 145,0 | 155,7 | 4,2 | RG4501450 | 148.82 x 3.53 | |
| 145,0 | 160,1 | 6,3 | RG4301450 | 151.77 x 5.33 | |
| 150,0 | 165,1 | 6,3 | RG4301500 | 158.12 x 5.33 | |
| 160,0 | 175,1 | 6,3 | RG4301600 | 164.47 x 5.33 | |
| 160,0 | 180,5 | 8,1 | RG4101600 | 170.82 x 7.00 | |
| 165,0 | 180,1 | 6,3 | RG4301650 | 170.82 x 5.33 | |
| 170,0 | 180,7 | 4,2 | RG4501700 | 177.39 x 3.53 | |
| 170,0 | 185,1 | 6,3 | RG4301700 | 177.17 x 5.33 | |
| 175,0 | 190,1 | 6,3 | RG4301750 | 183.52 x 5.33 | |
| 180,0 | 190,7 | 4,2 | RG4501800 | 183.74 x 3.53 | |
| 180,0 | 195,1 | 6,3 | RG4301800 | 183.17 x 5.33 | |
| 180,0 | 200,5 | 8,1 | RG4101800 | 189.87 x 7.00 | |
| 190,0 | 200,7 | 4,2 | RG4501900 | 196.44 x 3.53 | |
| 190,0 | 205,1 | 6,3 | RG4301900 | 196.22 x 5.33 | |
| 200,0 | 215,1 | 6,3 | RG4502000 | 208.92 x 5.33 | |
| 200,0 | 220,5 | 8,1 | RG4302000 | 215.27 x 7.00 | |
| 205,0 | 220,1 | 6,3 | RG4502050 | 208.92 x 5.33 | |
| 210,0 | 225,1 | 6,3 | RG4502100 | 215.27 x 5.33 | |
| 220,0 | 235,1 | 6,3 | RG4502200 | 227.97 x 5.33 | |
| 220,0 | 240,5 | 8,1 | RG4302200 | 227.97 x 7.00 |
| 230,0 | 245,1 | 6,3 | RG4502300 | 234.32 x 5.33 | |
| 230,0 | 250,5 | 8,1 | RG4302300 | 240.67 x 7.00 | |
| 240,0 | 255,1 | 6,3 | RG4502400 | 247.02 x 5.33 | |
| 240,0 | 260,5 | 8,1 | RG4302400 | 253.37 x 7.00 | |
| 250,0 | 270,5 | 8,1 | RG4302500 | 266.07 x 7.00 | |
| 260,0 | 284,0 | 8,1 | RG4302600 | 266.07 x 7.00 | |
| 270,0 | 290,5 | 8,1 | RG4502700 | 278.77 x 7.00 | |
| 270,0 | 294,0 | 8,1 | RG4302700 | 278.77 x 7.00 | |
| 275,0 | 299,0 | 8,1 | RG4302750 | 291.47 x 7.00 | |
| 280,0 | 300,5 | 8,1 | RG4502800 | 291.47 x 7.00 | |
| 280,0 | 304,0 | 8,1 | RG4302800 | 291.47 x 7.00 | |
| 290,0 | 310,5 | 8,1 | RG4502900 | 304.39 x 7.00 | |
| 290,0 | 314,0 | 8,1 | RG4302900 | 304.39 x 7.00 | |
| 300,0 | 324,0 | 8,1 | RG4303000 | 316.87 x 7.00 | |
| 310,0 | 330,5 | 8,1 | RG4503100 | 316.87 x 7.00 | |
| 310,0 | 334,0 | 8,1 | RG4303100 | 316.87 x 7.00 | |
| 320,0 | 344,0 | 8,1 | RG4303200 | 329.57 x 7.00 | |
| 330,0 | 354,0 | 8,1 | RG4303300 | 342.47 x 7.00 | |
| 340,0 | 364,0 | 8,1 | RG4303400 | 354.97 x 7.00 | |
| 350,0 | 370,5 | 8,1 | RG4503500 | 354.97 x 7.00 | |
| 350,0 | 374,0 | 8,1 | RG4303500 | 367.67 x 7.00 | |
| 360,0 | 384,0 | 8,1 | RG4303600 | 367.67 x 7.00 | |
| 370,0 | 390,5 | 8,1 | RG4503700 | 380.37 x 7.00 | |
| 370,0 | 394,0 | 8,1 | RG4303700 | 380.37 x 7.00 | |
| 380,0 | 404,0 | 8,1 | RG4303800 | 393.07 x 7.00 | |
| 390,0 | 414,0 | 8,1 | RG4303900 | 405.26 x 7.00 | |
| 400,0 | 420,5 | 8,1 | RG4504000 | 417.96 x 7.00 | |
| 400,0 | 424,0 | 8,1 | RG4304000 | 417.96 x 7.00 | |
| 410,0 | 434,0 | 8,1 | RG4304100 | 417.96 x 7.00 | |
| 420,0 | 444,0 | 8,1 | RG4304200 | 430.66 x 7.00 | |
| 430,0 | 454,0 | 8,1 | RG4304300 | 443.36 x 7.00 | |
| 440,0 | 464,0 | 8,1 | RG4304400 | 456.06 x 7.00 | |
| 450,0 | 474,0 | 8,1 | RG4304500 | 468.76 x 7.00 | |
| 460,0 | 484,0 | 8,1 | RG4304600 | 468.76 x 7.00 | |
| 470,0 | 494,0 | 8,1 | RG4304700 | 481.00 x 7.00 | |
| 480,0 | 504,0 | 8,1 | RG4304800 | 494.16 x 7.00 | |
| 490,0 | 514,0 | 8,1 | RG4304900 | 506.86 x 7.00 | |
| 500,0 | 524,0 | 8,1 | RG4305000 | 506.86 x 7.00 | |
| 510,0 | 534,0 | 8,1 | RG4305100 | 532.26 x 7.00 | |
| 520,0 | 544,0 | 8,1 | RG4305200 | 532.26 x 7.00 | |
| 530,0 | 554,0 | 8,1 | RG4305300 | 557.66 x 7.00 | |
| 540,0 | 564,0 | 8,1 | RG4305400 | 557.66 x 7.00 | |
| 550,0 | 574,0 | 8,1 | RG4305500 | 557.66 x 7.00 | |
| 560,0 | 584,0 |
|
RG4305600 | 582.68 x 7.00 | |
| 570,0 | 594,0 | 8,1 | RG4305700 | 582.68 x 7.00 |
| 580,0 | 604,0 | 8,1 | RG4305800 | 608.08 x 7.00 |
| 590,0 | 614,0 | 8,1 | RG4305900 | 608.08 x 7.00 |
| 600,0 | 624,0 | 8,1 | RG4306000 | 608.08 x 7.00 |
| 610,0 | 634,0 | 8,1 | RG4306100 | 633.48 x 7.00 |
| 620,0 | 644,0 | 8,1 | RG4306200 | 633.48 x 7.00 |
| 630,0 | 654,0 | 8,1 | RG4306300 | 658.88 x 7.00 |
| 640,0 | 664,0 | 8,1 | RG4306400 | 658.88 x 7.00 |
| 650,0 | 677,3 | 9,5 | RG4306500 | 663 x 8.4 |
| 660,0 | 687,3 | 9,5 | RG4306600 | 673 x 8.4 |
| 670,0 | 697,3 | 9,5 | RG4306700 | 683 x 8.4 |
| 680,0 | 707,3 | 9,5 | RG4306800 | 693 x 8.4 |
| 688,0 | 715,3 | 9,5 | RG4306880 | 701 x 8.4 |
| 690,0 | 717,3 | 9,5 | RG4306900 | 703 x 8.4 |
| 700,0 | 724,0 | 8,1 | RG4507000 | 712 x 7.0 |
| 710,0 | 737,3 | 9,5 | RG4307100 | 723 x 8.4 |
| 740,0 | 767,3 | 9,5 | RG4307400 | 753 x 8.4 |
| 760,0 | 784,0 | 8,1 | RG4507600 | 772 x 7.00 |
| 770,0 | 797,3 | 9,5 | RG4307700 | 783 x 8.4 |
| 800,0 | 827,3 | 9,5 | RG4308000 | 813 x 8.4 |
| 850,0 | 877,3 | 9,5 | RG4308500 | 863 x 8.4 |
| 870,0 | 897,3 | 9,5 | RG4308700 | 883 x 8.4 |
| 900,0 | 927,3 | 9,5 | RG4309000 | 913 x 8.4 |
| 910,0 | 937,3 | 9,5 | RG4309100 | 923 x 8.4 |
| 950,0 | 977,3 | 9,5 | RG4309500 | 963 x 8.4 |
| 960,0 | 987,3 | 9,5 | RG4309600 | 973 x 8.4 |
| 1000,0 | 1027,3 | 9,5 | RG45X1000 | 1013 x 8.4 |
| 1000,0 | 1038,0 | 13,8 | RG43X1000 | 1016 x 12 |
| 1050,0 | 1077,3 | 9,5 | RG45X1050 | 1063 x 8.4 |
| 1050,0 | 1088,0 | 13,8 | RG43X1050 | 1066 x 12 |
| 1100,0 | 1138,0 | 13,8 | RG43X1100 | 1116 x 12 |
| 1160,0 | 1187,3 | 9,5 | RG45X1160 | 1173 x 8.4 |
| 1200,0 | 1227,3 | 9,5 | RG45X1200 | 1213 x 8.4 |
| 1200,0 | 1238,0 | 13,8 | RG43X1200 | 1216 x 12 |
| 1300,0 | 1327,3 | 9,5 | RG45X1300 | 1313 x 8.4 |
| 1300,0 | 1338,0 | 13,8 | RG43X1300 | 1316 x 12 |
| 1500,0 | 1527,3 | 9,5 | RG45X1500 | 1513 x 8.4 |
| 1500,0 | 1538,0 | 13,8 | RG43X1500 | 1516 x 12 |
| 1600,0 | 1638,0 | 13,8 | RG43X1600 | 1616 x 12 |
| 2000,0 | 2038,0 | 13,8 | RG43X2000 | 2016 x 12 |
| 2600,0 | 2638,0 | 13,8 | RG43X2600 | 2616 x 12 |
Beoordelingen
Er zijn nog geen beoordelingen.