Claron Polyseal Piston & Rod Bearing Rings BGF

Get a quote

Design:

Claron BGF bearing rings are designed for use on pistons or rods to align rod and piston and to prevent metal to metal

contact. This bearing is precision moulded from a reinforced and heat stabilised grade of Nylon. The reinforcing fibres allows a higher than normal load capability and life span for this type of material. All Claron bearing rings are split to facilitate assembly, and to allow the passing of fluid. See the ‘selection of bearing rings’ at the beginning of this section for further application details.

Operating conditions:

PA Nylon
DIN Hydraulic Fluid Description °C
H Mineral oil without additives 120
H-L Mineral Fluid with anti corrosion and anti ageing additives 120
H-LP Mineral oil as HL plus additives reducing wear, raising load 120
H-LPD Mineral oil as H-LP but with detergents and dispersants 120
H-V Mineral oil as H-LP plus improved viscosity temp. 120
HFA E Emulsions of mineral oil in water. Water content 80-95% 55
HFA S Synthetic oil in water. Water content 80-95% 55
HFB Emulsions of water in mineral oil. Water content 40% 60
HFC Aqueous polymer solutions. Water content 35% 60
HFD R Phosphoric acid ester based 80
HFD S Chlorinated hydrocarbon based 80
HFD T Mixtures of HFD R and HFD S 80
HEPG Polyglycol based 100
HETG Vegetable Oil based 60
HEES Fully synthetic ester based 100

See graph at the beginning of this section for load capacity values

How to order:

Order using the part number shown followed by a suffix denoting the type of cut required:-

Type                        Suffix

Straight cut              /O

Angle cut                 /R60 (where the number represents the angle required)

 

Housing:

For surface finish and recommended lead in chamfers refer to the illustration below. For housing dimensions

and machining tolerances refer to the catalogue page of selected seal. Refer to Appendix 4 for value of tolerance symbols.

Fitting:

For the bearing to function correctly, it is important that care be taken in fitting the bearing within its housing. For a detailed checklist, refer to Appendix 3.

BGF 032028960/ 32,0 28,0 9,6
BGF 044040300/ 44,0 40,0 30,0
BGF 050044090/ 50,0 44,0 9,0
BGF 055040010/ 55,0 40,0 10,0
BGF 055049125/ 55,0 49,0 12,5
BGF 062057198/ 62,18 57,18 19,8
BGF 063058055/ 63,0 58,0 5,5
BGF 065050010/ 65,0 50,0 10,0
BGF 065055070/ 65,0 55,0 7,0
BGF 065061080/ 65,0 61,0 8,0
BGF 065061100/ 65,0 61,0 10,0
BGF 068064100/ 68,0 64,0 10,0
BGF 070064125/ 70,0 64,0 12,5
BGF 070065070/ 70,0 65,0 7,0
BGF 070065205/ 70,0 65,0 20,5
BGF 071066055/ 71,0 66,0 5,5
BGF 075060010/ 75,0 60,0 10,0
BGF 075070057/ 75,0 70,0 5,7 1.0 to 2.0
BGF 075071100/ 75,0 71,0 10,0
BGF 080074097/ 80,0 74,0 9,7
BGF 080074125/ 80,0 74,0 12,5
BGF 080075097/ 80,0 75,0 9,7
BGF 080076100/ 80,0 76,0 10,0
BGF 083080150/ 83,0 80,0 15,0
BGF 085081100/ 85,0 81,0 10,0
BGF 090084125/ 90,0 84,0 12,5
BGF 090085097/ 90,0 85,0 9,7
BGF 094089198/ 93,9 88,9 19,8
BGF 100094125/ 100,0 94,0 12,5
BGF 100095150/ 100,0 95,0 15,0
BGF 105101150/ 105,0 101,0 15,0
BGF 110104125/ 110,0 104,0 12,5
BGF 110105150/ 110,0 105,0 15,0
BGF 115111150/ 115,0 111,0 15,0
BGF 120114125/ 120,0 114,0 12,5
BGF 120116150/ 120,0 116,0 15,0
BGF 130125150/
130,0 125,0 15,0

Merk

Claron Polyseals

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “Claron Polyseal Piston & Rod Bearing Rings BGF” te beoordelen

Het e-mailadres wordt niet gepubliceerd. Vereiste velden zijn gemarkeerd met *

WE’D LOVE TO HELP

Get a qoute