Claron Polyseal Single & Double Acting Rod Wiper Seals 931 941 951

Get a quote

Design:

ClarOn Wİper SealS Style 941 and 951 are deSİgned aS IOW frİCtİOn DOuble□дCtİng SeaIS tO aSSİSt the SeaIİng CapabİIİt[ Of SİngIe¯aCtİng ROd SeaI arrangementS İn arduOuS COndİtİOnS. DOubIe ACtİng Wİper SeaIS Style 941 and

951 ShOuId nOt be utİIİSed İn COmbİnatİOn Wİth dOubIe¯aCtİng ROd SeaIS unIeSS the hOuSİng deSİgn aIIOWS fOr preSSure reIİef betWeen the Wİper and the SeaI.

 

CIarOn Wİper SeaIS Style 931 are deSİgned aS IOW frİCtİOn Sİngle□дCtİng ROd Wİper SeaIS fOr uSe Wİth Other SİngIe

Or dOubIe¯aCtİng ROd SeaIS İn h[drauIİC and pneumatİC C[IİnderS. ThİS St[Ie dOeS nOt Offer an[ aSSİStanCe tO the SeaIİng CapabİIİt[ Of the ROd SeaI and therefOre WOuId nOt be reCOmmended fOr uSe Where Style 941 and 951 COuId be utİIİSed. HOuSİng SİZeS and tOIeranCeS fOr Style 931 are İdentİCaI tO Style 941. Style 951 utİIİSeS a Seperate

range Of  İnStaIIatİOn SİZeS.

Materials:

Standard materİaIS are Vİrgİn MOdİfİed P.T.F.E Wİth a NİtrİIe O¯Rİng EnergİSer but bOth the İnner Wİper eIement and the energİSer are aVaİIabIe İn a Wİde range Of hİgh perfOrmanCe materİaIS tO Suİt a Varİet[ Of appIİCatİOnS. The appIİCatİOn parameterS ShOuId be CarefuII[ COnSİdered prİOr tO SeIeCtİng SuİtabIe materİaIS frOm the tabIeS ShOWn İn

AppendİX 2¯3. COnSuIt CIarOn fOr further adVİSe.

Operating range:

Temp. ¯50°C tO 200°C,  (Dependent upOn O¯Rİng MaterİaI uSed See AppendİX 2.) VeIOCİt[ uptO 15mlS Iİnear, 5mlS ROtar[ Or OSCİIIatİng

TheSe range parameterS are maXİmum COndİtİOnaI VaIueS.

Optİmum SerVİCe COndİtİOnS are affeCted b[ temperature, Speed and SurfaCe fİnİSh. Refer tO AppendİX 1 SeCtİOn fOr further İnfOrmatİOn.

Range of installation dimensions:

The fuII range Of dİameterS appIİCabIe tO the “Standard”, “Lİght” and “HeaV[” Dut[ SeCtİOnS are ShOWn İn the tabIe beIOW.

H o us ing R o d D ia .
S e c tio n W id th S ta nd a rd D uty L igh t D u ty H e a vy D uty
2 . 4 3 . 7 6 . 0 to 11 . 9 1 2 . 0 to 6 4 . 9
3 . 4 5 . 0 1 2 . 0 to 6 4 . 9 6 5 . 0 to 2 5 0 . 9 6 . 0 to 11 . 9
4 . 4 6 . 0 6 5 . 0 to 2 5 0 . 9 2 5 1 . 0 to 4 2 0 . 9 1 2 . 0 to 6 4 . 9
6 . 1 8 . 4 2 5 1 . 0 to 4 2 0 . 9 4 2 1 . 0 to 5 8 0 . 0 6 5 . 0 to 2 5 0 . 9
8 . 0 1 1 . 0 4 2 1 . 0 to 5 8 0 . 0 2 5 1 . 0 to 4 2 0 . 9

 

H o u s in g R o d D ia .
S e c t io n W id th S t a n d a rd D u ty L ig h t D u ty H e a v y D u ty
3 . 8 4 . 2 8 . 0 to 3 9 . 9 4 0 to 6 9 . 9
4 . 4 6 . 3 4 0 to 6 9 . 9 7 0 to 1 3 9 . 9
6 . 1 8 . 1 7 0 to 1 3 9 . 9 1 4 0 to 3 5 0 . 0
8 . 0 9 . 5 1 4 0 to 3 9 9 . 9 4 0 0 to 5 8 0 . 0 1 0 0 to 1 3 9 . 9
1 2 . 0 1 4 . 0 4 0 0 to 5 8 0 . 0 2 0 0 to 3 9 9 . 9

FOr Stдndдrd дnd Lİght Duty SeCtİOnS Splİt grOOVeS ShOuld be utİlİSed fOr ROd DİдmeterS < 30mm FOr HeдVy Duty SeCtİOnS uSe Splİt grOOVeS fOr ROd DİдmeterS <40mm

How to order:

When ordering, prefix the size reference with the style required and use the suffix shown in the material

application tables.

e.g.     931 Standard section in Virgin Modified material for 70mm Rod                                                                           931-0700/VM 941 Light duty section in Virgin Modified material for 70 mm Rod                                                          941-0700/1VM 941 Heavy duty section in Carbon filled material for 70 mm Rod                                                    941-0700/2C 951 Standard section in Virgin Modified material for 70mm Rod                                                            951-0700/VM

For O-Ring energiser materials other than Nitrile, use suffix shown in material table

e.g Flourocarbon material (FKM), 941-0700/VM/FKM

Housing;

For surface finish and lead in chamfers refer to the illustration below.

For Housing dimensions and tolerances refer to the table of recommended sizes.

For Standard and Light Duty Sections split grooves should be utilised for Rod Diameters < 30mm For Heavy Duty Sections use split grooves for Rod Diameters <40mm

Fitting:

For the seal to function correctly it is important that care is taken during fitting. For details refer to Appendix 3.

Part Number             f8               H9
1
Min
2
SECT MAX
d1 D D2 L1 L S R1
941-0060/VM 6,00 10,80 7,50 3,70 5,70 2,40 0,40
941-0063/VM 6,35 11,15 7,85 3,70 5,70 2,40 0,40
941-0080/VM 8,00 12,80 9,50 3,70 5,70 2,40 0,40
941-0100/VM 10,00 14,80 11,50 3,70 5,70 2,40 0,40
941-0120/VM 12,00 18,80 13,50 5,00 7,00 3,40 0,70
941-0140/VM 14,00 20,80 15,50 5,00 7,00 3,40 0,70
941-0150/VM 15,00 21,80 16,50 5,00 7,00 3,40 0,70
941-0160/VM 16,00 22,80 17,50 5,00 7,00 3,40 0,70
941-0180/VM 18,00 24,80 19,50 5,00 7,00 3,40 0,70
941-0200/VM 20,00 26,80 21,50 5,00 7,00 3,40 0,70
941-0220/VM 22,00 28,80 23,50 5,00 7,00 3,40 0,70
941-0250/VM 25,00 31,80 26,50 5,00 7,00 3,40 0,70
941-0280/VM 28,00 34,80 29,50 5,00 7,00 3,40 0,70
941-0300/VM 30,00 36,80 31,50 5,00 7,00 3,40 0,70
941-0320/VM 32,00 38,80 33,50 5,00 7,00 3,40 0,70
941-0350/VM 35,00 41,80 36,50 5,00 7,00 3,40 0,70
941-0360/VM 36,00 42,80 37,50 5,00 7,00 3,40 0,70
941-0400/VM 40,00 46,80 41,50 5,00 7,00 3,40 0,70
941-0420/VM 42,00 48,80 43,50 5,00 7,00 3,40 0,70
941-0450/VM 45,00 51,80 46,50 5,00 7,00 3,40 0,70
941-0480/VM 48,00 54,80 49,50 5,00 7,00 3,40 0,70
941-0500/VM 50,00 56,80 51,50 5,00 7,00 3,40 0,70
941-0520/VM 52,00 58,80 53,50 5,00 7,00 3,40 0,70
941-0550/VM 55,00 61,80 56,50 5,00 7,00 3,40 0,70
941-0560/VM 56,00 62,80 57,50 5,00 7,00 3,40 0,70
941-0600/VM 60,00 66,80 61,50 5,00 7,00 3,40 0,70
941-0630/VM 63,00 69,80 64,50 5,00 7,00 3,40 0,70
941-0650/VM 65,00 73,80 66,50 6,00 9,00 4,40 1,00
941-0700/VM 70,00 78,80 71,50 6,00 9,00 4,40 1,00
941-0750/VM 75,00 83,80 76,50 6,00 9,00 4,40 1,00
941-0762/VM 76,20 85,00 77,70 6,00 9,00 4,40 1,00
941-0800/VM 80,00 88,80 81,50 6,00 9,00 4,40 1,00
941-0850/VM 85,00 93,80 86,50 6,00 9,00 4,40 1,00
941-0900/VM 90,00 98,80 91,50 6,00 9,00 4,40 1,00
941-0950/VM 95,00 103,80 96,50 6,00 9,00 4,40 1,00
941-1000+A4:J24 100,00 108,80 101,50 6,00 9,00 4,40 1,00
941-1050/VM 105,00 113,80 106,50 6,00 9,00 4,40 1,00
941-1100/VM 110,00 118,80 111,50 6,00 9,00 4,40 1,00
941-1150/VM 115,00 123,80 116,50 6,00 9,00 4,40 1,00
941-1200/VM 120,00 128,80 121,50 6,00 9,00 4,40 1,00
941-1250/VM 125,00 133,80 126,50 6,00 9,00 4,40 1,00
941-1300/VM 130,00 138,80 131,50 6,00 9,00 4,40 1,00
941-1350/VM 135,00 143,80 136,50 6,00 9,00 4,40 1,00
941-1400/VM 140,00 148,80 141,50 6,00 9,00 4,40 1,00
941-1500/VM 150,00 158,80 151,50 6,00 9,00 4,40 1,00
941-1600/VM 160,00 168,80 161,50 6,00 9,00 4,40 1,00
941-1700/VM 170,00 178,80 171,50 6,00 9,00 4,40 1,00
941-1800/VM 180,00 188,80 181,50 6,00 9,00 4,40 1,00
941-1900/VM 190,00 198,80 191,50 6,00 9,00 4,40 1,00
941-2000/VM 200,00 208,80 201,50 6,00 9,00 4,40 1,00
941-2100/VM 210,00 218,80 211,50 6,00 9,00 4,40 1,00
941-2200/VM 220,00 228,80 221,50 6,00 9,00 4,40 1,00
941-2300/VM 230,00 238,80 231,50 6,00 9,00 4,40 1,00
941-2400/VM 240,00 248,80 241,50 6,00 9,00 4,40 1,00
941-2500/VM 250,00 258,80 251,50 6,00 9,00 4,40 1,00
941-2800/VM 280,00 292,20 282,00 8,40 11,40 6,10 1,20
941-3000/VM 300,00 312,20 302,00 8,40 11,40 6,10 1,20
941-3200/VM 320,00 332,20 322,00 8,40 11,40 6,10 1,20
941-3500/VM 350,00 362,20 352,00 8,40 11,40 6,10 1,20
941-3600/VM 360,00 372,20 362,00 8,40 11,40 6,10 1,20
941-4000/VM 400,00 412,20 402,00 8,40 11,40 6,10 1,20
941-4200/VM 420,00 432,20 422,00 8,40 11,40 6,10 1,20
941-4500/VM 450,00 466,00 452,00 11,00 15,00 8,00 1,50
941-4800/VM 480,00 496,00 482,00 11,00 15,00 8,00 1,50
941-5000/VM 500,00 516,00 502,00 11,00 15,00 8,00 1,50

 

951-0080/VM 8,00 15,60 9,00 4,20 7,20 3,80 0,70
951-0100/VM 10,00 17,60 11,00 4,20 7,20 3,80 0,70
951-0120/VM 12,00 19,60 13,00 4,20 7,20 3,80 0,70
951-0140/VM 14,00 21,60 15,00 4,20 7,20 3,80 0,70
951-0150/VM 15,00 22,60 16,00 4,20 7,20 3,80 0,70
951-0160/VM 16,00 23,60 17,00 4,20 7,20 3,80 0,70
951-0180/VM 18,00 25,60 19,00 4,20 7,20 3,80 0,70
951-0200/VM 20,00 27,60 21,00 4,20 7,20 3,80 0,70
951-0220/VM 22,00 29,60 23,00 4,20 7,20 3,80 0,70
951-0250/VM 25,00 32,60 26,00 4,20 7,20 3,80 0,70
951-0280/VM 28,00 35,60 29,00 4,20 7,20 3,80 0,70
951-0300/VM 30,00 37,60 31,00 4,20 7,20 3,80 0,70
951-0320/VM 32,00 39,60 33,00 4,20 7,20 3,80 0,70
951-0350/VM 35,00 42,60 36,00 4,20 7,20 3,80 0,70
951-0360/VM 36,00 43,60 37,00 4,20 7,20 3,80 0,70
951-0400/VM 40,00 48,80 41,50 6,30 9,30 4,40 0,70
951-0420/VM 42,00 50,80 43,50 6,30 9,30 4,40 0,70
951-0450/VM 45,00 53,80 46,50 6,30 9,30 4,40 0,70
951-0480/VM 48,00 56,80 49,50 6,30 9,30 4,40 0,70
951-0500/VM 50,00 58,80 51,50 6,30 9,30 4,40 0,70
951-0520/VM 52,00 60,80 53,50 6,30 9,30 4,40 0,70
951-0550/VM 55,00 63,80 56,50 6,30 9,30 4,40 0,70
951-0560/VM 56,00 64,80 57,50 6,30 9,30 4,40 0,70
951-0600/VM 60,00 68,80 61,50 6,30 9,30 4,40 0,70
951-0630/VM 63,00 71,80 64,50 6,30 9,30 4,40 0,70
951-0650/VM 65,00 73,80 66,50 6,30 9,30 4,40 0,70
951-0700/VM 70,00 82,20 72,00 8,10 12,10 6,10 1,00
951-0750/VM 75,00 87,20 77,00 8,10 12,10 6,10 1,00
951-0762/VM 76,20 88,40 78,20 8,10 12,10 6,10 1,00
951-0800/VM 80,00 92,20 82,00 8,10 12,10 6,10 1,00

Merk

Claron Polyseals

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “Claron Polyseal Single & Double Acting Rod Wiper Seals 931 941 951” te beoordelen

Het e-mailadres wordt niet gepubliceerd. Vereiste velden zijn gemarkeerd met *

WE’D LOVE TO HELP

Get a qoute