PAE PISTON SEAL
DESCRIPTION
The PAE Piston seal type is specially designed for heavy-duty applications. When the coupling clearance between bore and piston cannot be reduced and the pressure is very high – above 250 bar – the PAE seal type, thanks to a strong antiextrusion ring, is among the most appropriate of seal types.
TECHNICAL DATA
PAE Piston Seal
Pressure: <400 bar at a temperature of 60°C
Speed: <0.5 m/s
Temperature: from -35°C till +100°C
Fluids: mineral oils
MATERIAL
The material used for the seal is polyurethane C0 -type at 93 Sh A with high elasticity module. The anti-extrusion ring is made of acetylic resin R0 -type reinforced with fibreglass and with high tensile strength. Compound reference: CR
ASSEMBLY
The assembly of this seal is done in semi-open groove. The anti-extrusion ring should be installed after the seal. It is important to remove any flash or cutting edge on the piston not to damage the seal during the overlap phase
DRAWING PAE PISTON SEAL
ARTICLES PAE PISTON SEAL
| Dh9 | dh9 | d1* | h | E+0,2 | C | ART / ITEM | ||||
| 40,0 | 25,0 | 35,0 | 9,3 | 9,5 | 4,0 | PAE | 0400 | 0250 | 093 | CR |
| 45,0 | 30,0 | 40,0 | 9,3 | 9,5 | 4,0 | PAE | 0450 | 0300 | 093 | CR |
| 50,0 | 35,0 | 45,0 | 9,3 | 9,5 | 4,0 | PAE | 0500 | 0350 | 093 | CR |
| 55,0 | 40,0 | 50,0 | 9,3 | 9,5 | 4,0 | PAE | 0550 | 0400 | 093 | CR |
| 60,0 | 45,0 | 55,0 | 9,3 | 9,5 | 4,0 | PAE | 0600 | 0450 | 093 | CR |
| 63,0 | 48,0 | 58,0 | 9,3 | 9,5 | 4,0 | PAE | 0630 | 0480 | 093 | CR |
| 65,0 | 50,0 | 60,0 | 9,3 | 9,5 | 4,0 | PAE | 0650 | 0500 | 093 | CR |
| 70,0 | 50,0 | 64,0 | 12,2 | 12,5 | 5,0 | PAE | 0700 | 0500 | 122 | CR |
| 75,0 | 55,0 | 69,0 | 12,2 | 12,5 | 5,0 | PAE | 0750 | 0550 | 122 | CR |
| 80,0 | 60,0 | 74,0 | 12,2 | 12,5 | 5,0 | PAE | 0800 | 0600 | 122 | CR |
| 85,0 | 70,0 | 80,0 | 9,3 | 9,5 | 4,0 | PAE | 0850 | 0700 | 093 | CR |
| 90,0 | 70,0 | 84,0 | 12,2 | 12,5 | 5,0 | PAE | 0900 | 0700 | 122 | CR |
| 100,0 | 80,0 | 94,0 | 12,2 | 12,5 | 5,0 | PAE | 1000 | 0800 | 122 | CR |
| 105,0 | 85,0 | 99,0 | 12,2 | 12,5 | 5,0 | PAE | 1050 | 0850 | 122 | CR |
| 110,0 | 90,0 | 104,0 | 12,2 | 12,5 | 5,0 | PAE | 1100 | 0900 | 122 | CR |
| 115,0 | 95,0 | 109,0 | 12,2 | 12,5 | 5,0 | PAE | 1150 | 0950 | 122 | CR |
| 125,0 | 100,0 | 117,0 | 15,2 | 16,2 | 6,5 | PAE | 1250 | 1000 | 152 | CR |
| 125,0 | 105,0 | 119,0 | 12,2 | 12,5 | 5,0 | PAE | 1250 | 1050 | 122 | CR |
| 130,0 | 110,0 | 124,0 | 12,2 | 12,5 | 5,0 | PAE | 1300 | 1100 | 122 | CR |
| 140,0 | 115,0 | 132,0 | 15,2 | 16,2 | 6,5 | PAE | 1400 | 1150 | 152 | CR |
| 140,0 | 120,0 | 134,0 | 12,2 | 12,5 | 5,0 | PAE | 1400 | 1200 | 122 | CR |
* recommended hook diameter wich could be modified accordingly to mounting demand
Beoordelingen
Er zijn nog geen beoordelingen.