TURCON GLYD RING
Description
Successfully used for decades, the Tucon Glyd Ring is a very effective and reliable low frictional seal. It is particularly suitable as a rod seal in both high and low pressure systems.
The double acting Tucon Glyd Ring is a combination of a Turcon based slipper seal and an energising O-Ring. It is produced with an interference fit which together with the squeeze of the O-Ring ensures a good sealing effect even at low pressure. At higher system pressures, the O-Ring energised by the fluid, pushing the Turcon Glyd Ring against the sealing face with increased force.
The geometry of the Tucon Glyd Ring ensures a good static sealing and allows the lubricating hydrodynamic oil film to be build under the seal in reciprocating applications.
Notches
To assure that a rapid energising of the seal takes place at sudden changes of pressure and direction of motion, radial ”notches” are machined on both sides of the seal.
Notches are standard on the following series and diameters
RG 41 for bore dia. > 30mm
RG 43 for bore dia. > 20mm
RG 45 for bore dia. > 40mm
Advantages
– No stick-slip effect when starting for smooth operation
– Minimum static and dynamic friction coefficient for a minimum energy loss and operating temperature
– Suitable for non lubricating fluids depending on seal material for optimum design flexibility
– High wear resistance ensures long service life
– Installation grooves acc. to ISO 7425/2
– No adhesive effect to the mating surface during long period of inactivity or storage
– Suitable for most hydraulic fluids in relation with most modern hardware materials and surface finish depending on material selected.
– Suitable for new environmentally safe hydraulic fluids
– Available for all rod diameters up to 2.600 mm.
Applications examples
Over several decades the Turcon Glyd Ring has been successfully implemented in a lot of applications as double acting Rod seals of hydraulic components such as:
- Injection moulding machines
- Machine tools
- Presses
- Handling machinery
- Valves for hydraulic & pneumatic circuits.
Technical Data
Operating conditions:
The Turcon Glyd Ring is recommended for reciprocating (with a length of stroke at least twice the groove width) and helical movements.
Pressure: up to 80MPa
Speed: up to 15m/s
Frequency: up to 5 Hz.
Temperature: -45°C to +200°C (depending on O-Ring Material)
Media: Mineral oil based hydraulic fluids, barely flammable hydraulic fluids, environmentally safe hydraulic fluids (biological degradable oils), water, air and others. Depending on the O-Ring material compatibility.
Clearance: the maximum permissible radial
clearance Smax is shown in the table, as a function of the operating pressure and functional diameter.
Important Note:
The above data are maximum values and cannot be used at the same time. e.g. the maximum operating speed depends on material type, pressure, temperature and gap value.
Materials
Standard Application:
For hydraulic components with reciprocating movement in mineral oils or medium with good lubricating performance.
Turcon seal: Turcon T46
Energiser: O-Ring NBR 70 shore A or FKM 70 Shore A depending on the temperature
Set: T46N or T46V
Special Application:
Short stroke movements, non-lubricating fluids or pneumatic applications require self-lubricating sealing materials. Therefore we recommend:
Turcon Seal: Turcon T29
Energiser: O-Ring NBR 70 Shore A or FKM 70 Shore A depending on the temperature
Set: T29N or T29V
If low friction coefficient is required, we recommend:
Turcon Seal: Turcon T05
Energiser: O-Ring NBR 70 Shore A or FKM 70 Shore A depending on the temperature. For special requirements other elastomers are available on request
Set: T05N or T05V
If rougher surface finish must be sealed, we recommend:
Zurcon seal: Zurcon Z51
Energiser: O-Ring NBR 70 Shore A
Set ref.: Z51N
| Material, Applications, Properties | Code | O-Ring Material | Code | O-Ring Operating Temp.* °C |
Mating Surface Material | MPa max. |
| Turcon T46 Standard material for hydraulics, high compressive strength, good sliding and wear properties, good extrusion resistance, BAM tested. Bronze filled Colour: Greyish to dark brown |
T46 | NBR – 70 Shore A | N | -30 to +100 | Steel, hardened S eel, chromeplated Cast iron |
60 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 | ||||
| FKM – 70 Shore A | V | -10 to +200 | ||||
| Turcon T08 Very high compressive strength, very good extrusion resistance. High bronze filled Colour: Light to dark brown |
T08 | NBR – 70 Shore A | N | -30 to +100 | Steel, hardened Steel, chromeplated Cast iron | 80 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 | ||||
| FKM – 70 Shore A | V | -10 to +200 | ||||
| Turcon T40 For all lubricating and non-lubricating hydraulic fluids, hydraulic oils without zinc, water hydraulic, soft mating surfaces. Carbon fibre filled Colour: Grey |
T40 | NBR – 70 Shore A | N | -30 to +100 | Steel Steel, chromeplated Cast iron Stainless steel Aluminium Bronze Alloys |
25 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 | ||||
| FKM – 70 Shore A | V | -10 to +200 | ||||
| EPDM-70 Shore A | E** |
|
||||
| Turcon T29 For all lubricating and non-lubricating hydraulic fluids, soft mating surfaces, good extrusion resistance. High carbon fibre filled Colour: Grey |
T29 | NBR – 70 Shore A | N | -30 to +100 | Steel Steel, chromeplated Cast iron Stainless steel Aluminium Bronze |
60 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 | ||||
| FKM – 70 Shore A | V | -10 to +200 | ||||
| EPDM-70 Shore A | E** | -45 to +145 | ||||
| Turcon T05 For all lubricating hydraulic fluids, hard mating surfaces, very good slide properties, low friction. Colour: Turquoise |
T05 | NBR – 70 Shore A | N | -30 to +100 | Steel, hardened Steel, chromeplated | 20 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 | ||||
| FKM – 70 Shore A | V | -10 to +200 | ||||
| Turcon T42 For all lubricating and non-lubricating hydraulic fluids, good chemical resistance, good dielectric properties. Glass fibre filled + MoS2 Colour: Grey to blue |
T42 | NBR – 70 Shore A | N | -30 to +100 | Steel, hardened Steel, chromeplated Cast iron | 30 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 | ||||
| FKM – 70 Shore A | V | -10 to +200 | ||||
| Turcon T10 For oil hydraulic and pneumatic, for all lubricating and non- lubricating fluids, high extrusion resistance, good chemical resistance, BAM tested. Carbon, graphite filled Colour: Black |
T10 | NBR – 70 Shore A | N | -30 to +100 | Steel Steel, chromeplated Stainless steel |
60 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 | ||||
| FKM – 70 Shore A | V | -10 to +200 | ||||
| EPDM-70 Shore A | E** | -45 to +145 | ||||
| Zurcon Z51*** For lubricating hydraulic fluids, high abrasion resistance, high extrusion resistance, limited chemical resistance. Cast polyurethane Colour: Yellow to light-brown |
Z51 | NBR – 70 Shore A | N | -30 to +100 | Steel Steel, chromeplated Cast iron Ceramic coating Stainless steel |
80 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 | ||||
| ZurconR Z80 For lubricating and non-lubricating hydraulic fluids, high abrasion resistance, very good chemical resistance, limited temperature resistance. Ultra high molecular weight polyethylen Colour: White to off-white |
Z80 | NBR – 70 Shore A | N | -30 to +80 | Steel Steel, chromeplated Stainless steel Aluminium Bronze Ceramic coating |
40 |
| NBR – Low temp. 70 Shore A |
T | -45 to +80 |
Ordering Example
Turcon Glyd Ring, complete with O-Ring, standard
series, Series RG43 (from Table).
Rod diameter: dN = 80.0 mm
Part No.: RG4300800 (from Table)
Select the material from Table. The corresponding code numbers are appended to the Part No. (from Table). Together these form the order number. The order number for all intermediate sizes not shown in Table, can be determined following the example opposite.
**** For diameters ≥ 1000.0 mm multiply only by factor 1. Example: RG43 for diameter 1200.0 mm. Order no.: RG43X1200 – T46N.
|
Groove Diame- ter | Groove Width | Part No. | O-Ring Sizes | |
| dN f8/h9 | D1 H9 | L1 +0.2 | |||
| 100,0 | 110,7 | 4,2 | RG4501000 | 104.37 x 3.53 | |
| 100,0 | 115,1 | 6,3 | RG4301000 | 107.32 x 5.33 | |
| 101,6 | 112,3 | 4,2 | RG4501016 | 107.54 x 3.53 | |
| 101,6 | 116,7 | 6,3 | RG4301016 | 107.32 x 5.33 | |
| 104,7 | 119,8 | 6,3 | RG4301047 | 110.49 x 5.33 | |
| 105,0 | 115,7 | 4,2 | RG4501050 | 110.72 x 3.53 | |
| 105,0 | 120,1 | 6,3 | RG4301050 | 110.49 x 5.33 | |
| 110,0 | 120,7 | 4,2 | RG4501100 | 113.89 x 3.53 | |
| 110,0 | 125,1 | 6,3 | RG4301100 | 116.84 x 5.33 | |
| 110,0 | 130,5 | 8,1 | RG4101100 | 120.02 x 7.00 | |
| 112,0 | 127,1 | 6,3 | RG4301120 | 116.84 x 5.33 | |
| 115,0 | 125,7 | 4,2 | RG4501150 | 120.24 x 3.53 | |
| 115,0 | 130,1 | 6,3 | RG4301150 | 120.02 x 5.33 | |
| 118,0 | 133,1 | 6,3 | RG4301180 | 123.19 x 5.33 | |
| 120,0 | 130,7 | 4,2 | RG4501200 | 123.42 x 3.53 | |
| 120,0 | 135,1 | 6,3 | RG4301200 | 126.37 x 5.33 | |
| 125,0 | 135,7 | 4,2 | RG4501250 | 129.77 x 3.53 | |
| 125,0 | 140,1 | 6,3 | RG4301250 | 129.54 x 5.33 | |
| 129,0 | 139,7 | 4,2 | RG4501290 | 132.94 x 3.53 | |
| 130,0 | 140,7 | 4,2 | RG4501300 | 136.12 x 3.53 | |
| 130,0 | 145,1 | 6,3 | RG4301300 | 135.89 x 5.33 | |
| 135,0 | 145,7 | 4,2 | RG4501350 | 139.29 x 3.53 | |
| 135,0 | 150,1 | 6,3 | RG4301350 | 142.24 x 5.33 | |
| 140,0 | 150,7 | 4,2 | RG4501400 | 145.64 x 3.53 | |
| 140,0 | 155,1 | 6,3 | RG4301400 | 145.42 x 5.33 | |
| 145,0 | 155,7 | 4,2 | RG4501450 | 148.82 x 3.53 | |
| 145,0 | 160,1 | 6,3 | RG4301450 | 151.77 x 5.33 | |
| 150,0 | 165,1 | 6,3 | RG4301500 | 158.12 x 5.33 | |
| 160,0 | 175,1 | 6,3 | RG4301600 | 164.47 x 5.33 | |
| 160,0 | 180,5 | 8,1 | RG4101600 | 170.82 x 7.00 | |
| 165,0 | 180,1 | 6,3 | RG4301650 | 170.82 x 5.33 | |
| 170,0 | 180,7 | 4,2 | RG4501700 | 177.39 x 3.53 | |
| 170,0 | 185,1 | 6,3 | RG4301700 | 177.17 x 5.33 | |
| 175,0 | 190,1 | 6,3 | RG4301750 | 183.52 x 5.33 | |
| 180,0 | 190,7 | 4,2 | RG4501800 | 183.74 x 3.53 | |
| 180,0 | 195,1 | 6,3 | RG4301800 | 183.17 x 5.33 | |
| 180,0 | 200,5 | 8,1 | RG4101800 | 189.87 x 7.00 | |
| 190,0 | 200,7 | 4,2 | RG4501900 | 196.44 x 3.53 | |
| 190,0 | 205,1 | 6,3 | RG4301900 | 196.22 x 5.33 | |
| 200,0 | 215,1 | 6,3 | RG4502000 | 208.92 x 5.33 | |
| 200,0 | 220,5 | 8,1 | RG4302000 | 215.27 x 7.00 | |
| 205,0 | 220,1 | 6,3 | RG4502050 | 208.92 x 5.33 | |
| 210,0 | 225,1 | 6,3 | RG4502100 | 215.27 x 5.33 | |
| 220,0 | 235,1 | 6,3 | RG4502200 | 227.97 x 5.33 | |
| 220,0 | 240,5 | 8,1 | RG4302200 | 227.97 x 7.00 | |
| Rod Diame- ter | Groove Diame- ter | Groove Width | Part No. | O-Ring Sizes | |
| dN f8/h9 | D1 H9 | L1 +0.2 | |||
| 230,0 | 245,1 | 6,3 | RG4502300 | 234.32 x 5.33 | |
| 230,0 | 250,5 | 8,1 | RG4302300 | 240.67 x 7.00 | |
| 240,0 | 255,1 | 6,3 | RG4502400 | 247.02 x 5.33 | |
| 240,0 | 260,5 | 8,1 | RG4302400 | 253.37 x 7.00 | |
| 250,0 | 270,5 | 8,1 | RG4302500 | 266.07 x 7.00 | |
| 260,0 | 284,0 | 8,1 | RG4302600 | 266.07 x 7.00 | |
| 270,0 | 290,5 | 8,1 | RG4502700 | 278.77 x 7.00 | |
| 270,0 | 294,0 | 8,1 | RG4302700 | 278.77 x 7.00 | |
| 275,0 | 299,0 | 8,1 | RG4302750 | 291.47 x 7.00 | |
| 280,0 | 300,5 | 8,1 | RG4502800 | 291.47 x 7.00 | |
| 280,0 | 304,0 | 8,1 | RG4302800 | 291.47 x 7.00 | |
| 290,0 | 310,5 | 8,1 | RG4502900 | 304.39 x 7.00 | |
| 290,0 | 314,0 | 8,1 | RG4302900 | 304.39 x 7.00 | |
| 300,0 | 324,0 | 8,1 | RG4303000 | 316.87 x 7.00 | |
| 310,0 | 330,5 | 8,1 | RG4503100 | 316.87 x 7.00 | |
| 310,0 | 334,0 | 8,1 | RG4303100 | 316.87 x 7.00 | |
| 320,0 | 344,0 | 8,1 | RG4303200 | 329.57 x 7.00 | |
| 330,0 | 354,0 | 8,1 | RG4303300 | 342.47 x 7.00 | |
| 340,0 | 364,0 | 8,1 | RG4303400 | 354.97 x 7.00 | |
| 350,0 | 370,5 | 8,1 | RG4503500 | 354.97 x 7.00 | |
| 350,0 | 374,0 | 8,1 | RG4303500 | 367.67 x 7.00 | |
| 360,0 | 384,0 | 8,1 | RG4303600 | 367.67 x 7.00 | |
| 370,0 | 390,5 | 8,1 | RG4503700 | 380.37 x 7.00 | |
| 370,0 | 394,0 | 8,1 | RG4303700 | 380.37 x 7.00 | |
| 380,0 | 404,0 | 8,1 | RG4303800 | 393.07 x 7.00 | |
| 390,0 | 414,0 | 8,1 | RG4303900 | 405.26 x 7.00 | |
| 400,0 | 420,5 | 8,1 | RG4504000 | 417.96 x 7.00 | |
| 400,0 | 424,0 | 8,1 | RG4304000 | 417.96 x 7.00 | |
| 410,0 | 434,0 | 8,1 | RG4304100 | 417.96 x 7.00 | |
| 420,0 | 444,0 | 8,1 | RG4304200 | 430.66 x 7.00 | |
| 430,0 | 454,0 | 8,1 | RG4304300 | 443.36 x 7.00 | |
| 440,0 | 464,0 | 8,1 | RG4304400 | 456.06 x 7.00 | |
| 450,0 | 474,0 | 8,1 | RG4304500 | 468.76 x 7.00 | |
| 460,0 | 484,0 | 8,1 | RG4304600 | 468.76 x 7.00 | |
| 470,0 | 494,0 | 8,1 | RG4304700 | 481.00 x 7.00 | |
| 480,0 | 504,0 | 8,1 | RG4304800 | 494.16 x 7.00 | |
| 490,0 | 514,0 | 8,1 | RG4304900 | 506.86 x 7.00 | |
| 500,0 | 524,0 | 8,1 | RG4305000 | 506.86 x 7.00 | |
| 510,0 | 534,0 | 8,1 | RG4305100 | 532.26 x 7.00 | |
| 520,0 | 544,0 | 8,1 | RG4305200 | 532.26 x 7.00 | |
| 530,0 | 554,0 | 8,1 | RG4305300 | 557.66 x 7.00 | |
| 540,0 | 564,0 | 8,1 | RG4305400 | 557.66 x 7.00 | |
| 550,0 | 574,0 | 8,1 | RG4305500 | 557.66 x 7.00 | |
| 560,0 | 584,0 |
|
RG4305600 | 582.68 x 7.00 | |
| 570,0 | 594,0 | 8,1 | RG4305700 | 582.68 x 7.00 |
| 580,0 | 604,0 | 8,1 | RG4305800 | 608.08 x 7.00 |
| 590,0 | 614,0 | 8,1 | RG4305900 | 608.08 x 7.00 |
| 600,0 | 624,0 | 8,1 | RG4306000 | 608.08 x 7.00 |
| 610,0 | 634,0 | 8,1 | RG4306100 | 633.48 x 7.00 |
| 620,0 | 644,0 | 8,1 | RG4306200 | 633.48 x 7.00 |
| 630,0 | 654,0 | 8,1 | RG4306300 | 658.88 x 7.00 |
| 640,0 | 664,0 | 8,1 | RG4306400 | 658.88 x 7.00 |
| 650,0 | 677,3 | 9,5 | RG4306500 | 663 x 8.4 |
| 660,0 | 687,3 | 9,5 | RG4306600 | 673 x 8.4 |
| 670,0 | 697,3 | 9,5 | RG4306700 | 683 x 8.4 |
| 680,0 | 707,3 | 9,5 | RG4306800 | 693 x 8.4 |
| 688,0 | 715,3 | 9,5 | RG4306880 | 701 x 8.4 |
| 690,0 | 717,3 | 9,5 | RG4306900 | 703 x 8.4 |
| 700,0 | 724,0 | 8,1 | RG4507000 | 712 x 7.0 |
| 710,0 | 737,3 | 9,5 | RG4307100 | 723 x 8.4 |
| 740,0 | 767,3 | 9,5 | RG4307400 | 753 x 8.4 |
| 760,0 | 784,0 | 8,1 | RG4507600 | 772 x 7.00 |
| 770,0 | 797,3 | 9,5 | RG4307700 | 783 x 8.4 |
| 800,0 | 827,3 | 9,5 | RG4308000 | 813 x 8.4 |
| 850,0 | 877,3 | 9,5 | RG4308500 | 863 x 8.4 |
| 870,0 | 897,3 | 9,5 | RG4308700 | 883 x 8.4 |
| 900,0 | 927,3 | 9,5 | RG4309000 | 913 x 8.4 |
| 910,0 | 937,3 | 9,5 | RG4309100 | 923 x 8.4 |
| 950,0 | 977,3 | 9,5 | RG4309500 | 963 x 8.4 |
| 960,0 | 987,3 | 9,5 | RG4309600 | 973 x 8.4 |
| 1000,0 | 1027,3 | 9,5 | RG45X1000 | 1013 x 8.4 |
| 1000,0 | 1038,0 | 13,8 | RG43X1000 | 1016 x 12 |
| 1050,0 | 1077,3 | 9,5 | RG45X1050 | 1063 x 8.4 |
| 1050,0 | 1088,0 | 13,8 | RG43X1050 | 1066 x 12 |
| 1100,0 | 1138,0 | 13,8 | RG43X1100 | 1116 x 12 |
| 1160,0 | 1187,3 | 9,5 | RG45X1160 | 1173 x 8.4 |
| 1200,0 | 1227,3 | 9,5 | RG45X1200 | 1213 x 8.4 |
| 1200,0 | 1238,0 | 13,8 | RG43X1200 | 1216 x 12 |
| 1300,0 | 1327,3 | 9,5 | RG45X1300 | 1313 x 8.4 |
| 1300,0 | 1338,0 | 13,8 | RG43X1300 | 1316 x 12 |
| 1500,0 | 1527,3 | 9,5 | RG45X1500 | 1513 x 8.4 |
| 1500,0 | 1538,0 | 13,8 | RG43X1500 | 1516 x 12 |
| 1600,0 | 1638,0 | 13,8 | RG43X1600 | 1616 x 12 |
| 2000,0 | 2038,0 | 13,8 | RG43X2000 | 2016 x 12 |
| 2600,0 | 2638,0 | 13,8 | RG43X2600 | 2616 x 12 |
Beoordelingen
Er zijn nog geen beoordelingen.